Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 553

Parameter Item No.
Paper size 102
Paper tray 103
Coordinate 104
rotation
Color mode 105
Sets the default paper size. Only available when [Paper tray] is set to
[Auto] or [Tray 5]. Only cut sheet can be set.
[3] : A3
[4] (Default*) : A4
[5] : A5
[14] : B4
[15] : B5
[99] : Auto
[101] (Default*) : A Size
Important • When Trays 1 to 4 is selected, [Paper size] cannot be set. The paper
size loaded in the specified tray is displayed.
Note • If [A Size] or [Auto] is selected, the settings become as follows:
• When [Document size] is set to other than [Auto], [Paper size] is set
to [A3].
• When Trays 1 to 4 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper size] cannot be
set.
• Depending on the combination of [Document size] and [Paper size],
[?] may be displayed for the magnification. In this case, the
document is printed at a scale of 100%.
Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF B1)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper size] cannot
be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation in multiple trays is loaded, paper will be fed in the order of
Tray 1 Tray 2
loaded in multiple trays but in different orientations, feeding of the
paper loaded in the landscape orientation is prioritized.
Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1] : 90 degree
Sets the color mode.
[0] : Color
[1] (Default) : Grayscale
[2] : Black pen
HP-GL2 Emulation
Value
Tray 3 Tray 4. If paper of the same size is
15
551