Staple Jams In Staple Cartridge (For Finisher-B1) - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

6
Push the staple cartridge into the machine
until it clicks into place.
7
Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.

Staple Jams in Staple Cartridge (For Finisher-B1)

This section describes how to clear staple jam occurred in the staple cartridge of the
Finisher-B1 (optional).
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Grasp the handle as shown in the illustration
to pull out the staple cartridge to the right,
towards you.
3
Move up the staple cartridge, and then take
it out of the machine.
remains paused.
Stapler Faults
14
505