Internet Fax Control - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

5 Tools

Internet Fax Control

You can configure the settings related to the Internet fax control.
Internet Fax Path
Set the Internet fax communication path.
Via E-mail Server
Sends e-mail via an SMTP server.
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
Specifying an IP address
@ must be followed by an IP address with brackets.
Example: local-part@[129.249.123.1]
Profile for Broadcast Job
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
5
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
Important • The supported TIFF-file profiles vary depending on the destination Internet Fax-enabled
TIFF-S
The Internet fax standard profile. For documents larger than A4, the size is automatically
reduced to A4 when transmission.
TIFF-F
Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.
Broadcast Starting Rate
Set the default value for the communications mode for the broadcasting for the Internet fax.
Delivery Confirmation Method
Set the default value for the method of confirming that an Internet fax sent has arrived or not.
To print a transmission result, set [Print Delivery Confirmation Mail] to [On] under [E-mail/
Internet Fax Service Settings] > [E-mail Control].
Note
Delivery Receipts
You can confirm whether the Internet fax you sent is delivered to the recipient's folder
successfully.
Read Receipts
You can confirm whether the Internet fax including attachments you sent is processed
properly at the recipient.
208
machine. Before specifying a profile, check the profile that the destination machine supports.
• You can select [Delivery Receipts] when the destination machine supports the DSN feature.
You can use [Read Receipts] when the destination machine supports the MDN feature.