Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 482

14 Problem Solving
Error Code
C P F S M O
033-565
033-566
033-567
033-568
033-569
033-570
033-571
033-572
033-574
033-575
033-576
033-577
14
033-578
033-710
033-712
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
480
Category
O [Cause]
[Remedy] Wait until the number of jobs awaiting transmission
O [Cause]
[Remedy] Correctly specify the recipient's fax number.
O [Cause]
[Remedy] Correctly enter the recipient's fax number, and execute the
O [Cause]
[Remedy] Execute the operation again. If receiving, ask the sender
O [Cause]
[Remedy] Load paper in Tray 5 according to the direction displayed
O [Cause]
[Remedy] Wait for a while, confirm the Fax service settings and the
O [Cause]
[Remedy] Cancel the fax data in the queue, or wait for a while, and
O [Cause]
[Remedy] No measure is required. The data will be printed after a
O [Cause]
[Remedy] Specify an available line.
O [Cause]
[Remedy] Execute the operation again.
O [Cause]
[Remedy] Enter a correct fax number, and execute the operation
O [Cause]
[Remedy] Execute the operation again.
O [Cause]
[Remedy] Confirm the status of the line and the recipient machine,
O [Cause]
[Remedy] Store the document again.
O [Cause]
[Remedy] Delete unnecessary data.
Cause and Remedy
Cannot send because too many recipients are specified.
decreases, or reduce the number of recipients, and then
send again.
Cannot send because the recipient (fax number) is not
specified.
The recipient (fax number) is incorrect.
operation again.
An error occurred during fax transmission.
to send again. If the error still is not resolved, contact our
Customer Support Center.
Paper in the tray is not loaded in the direction that the
received fax data can be printed.
on the screen.
The machine was turned off during communication.
fax number, and then send again if sending. If the error still
is not resolved, contact our Customer Support Center.
Cannot use the Fax service because of causes such as
memory is insufficient.
execute the operation again.
The data received is not printed.
while.
An unavailable line is specified.
An error occurred during fax transmission.
The recipient (fax number) is incorrect.
again.
An error occurred during fax transmission.
An error occurred during fax receiving.
and then ask the sender to send again.
The document to be sent by polling was deleted.
Unable to process because of insufficient memory.