Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 435

Category
Error Code
C P F S M O
016-598
016-599
016-700 O
016-702
O
016-703 O
016-704
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
O [Cause] The size of an e-mail page exceeds the maximum
message size because of page splitting.
[Remedy] Take one of the following measures:
Reduce the file size for [Quality/File Size].
Increase the value for [Maximum Split Count].
For more information on [Quality/File Size], refer to "5 Scan" > "E-mail
Options/Filing Options" > "Quality/File Size (Specifying an Image
Compression Ratio When Scanning)" in the User Guide.
For more information on [Maximum Split Count], refer to "Maximum Split
Count" (P.211).
[Cause] The job was suspended because the number of the digits
for the Secure Print or Charge Print passcode set on the
print driver was less than the value specified in [Minimum
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or
longer than the value specified in [Minimum Passcode
Length for Stored Job].
[Cause] Unable to process print data because of insufficient print
page buffer.
[Remedy] Take one of the following measures:
Set [Image Quality] to [Standard].
Increase the print page buffer size.
Add memory.
For more information on the [Image Quality], refer to the help of the print
driver. For more information about memory, refer to "Allocate Memory"
(P.186).
O [Cause] The machine received e-mail which specified an invalid
folder number.
[Remedy] For errors occurring during fax or Internet fax
transmission:
Contact our Customer Support Center.
For errors occurring during e-mail/fax/Internet fax
reception:
Take one of the following measures:
Register the specified folder number, and request the
sender to send the e-mail/fax/Internet fax again.
Request the sender to send to an available folder.
If the error still is not resolved, contact our Customer
Support Center.
O [Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Refer to "6 Send from Folder" > "Checking/Operating Files in a Folder" in
the User Guide.
Cause and Remedy
Error Code
14
433