Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 403

Symptom
The image is not The document glass or the
the desired size. document cover is dirty.
The document is a
transparent type such as a
transparency film.
The document is
misaligned.
The document guides on
the document feeder are not
set in the correct positions.
The document is a non-
standard size.
The document is folded.
The image is not [Color Scanning] is set to
scanned in color. [Black & White], or
[Grayscale].
The image is The resolution is too low.
coarse.
Image is saved with high
compression.
Black-and-white [Black & White] is selected
gradation is not for [Color Scanning].
reproduced
properly.
Cause
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.83).
Place a white sheet of paper on top of the
document when scanning.
Load the document correctly.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
Load the document correctly, and align the
document guides to the document.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
Specify the document size.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
Flatten the curl and load the document
again.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
Set [Color Scanning] to [Color].
Refer to "5 Scan" > "E-mail" in the User
Guide.
Set the resolution higher.
Refer to "5 Scan" > "Layout Adjustment" in the
User Guide.
Select a lower compression ratio in
[Quality/File Size].
Refer to "5 Scan" > "E-mail Options/Filing
Options" in the User Guide.
Set [Color Scanning] to [Grayscale].
Refer to "5 Scan" > "E-mail" in the User
Guide.
Trouble during Scanning
Remedy
401
14