Other Settings - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

5 Tools
Login User Name
Enter the login user name with up to 128 characters.
Login Password
Enter the login password with up to 128 characters.
Server Certificate Verification
Select whether or not to verify a server certificate when [PEAP/MS-CHAPv2] is selected in
[Authentication Method].
Certificate Revocation Retrieval Settings
Configure the settings for certificate revocation retrieval.
Level of Certificate Verification
Select a level of certificate verification from [Low], [Medium], or [High].
Selecting [Low] does not verify the validity of certificates.
Selecting [Medium] verifies the validity of certificates. If a certificate cannot be verified
because of a network error or any other problems, the certificate is determined as valid.
Selecting [High] verifies the validity of certificates, and determines only certificates that have
not been revoked as valid.
Retrieval of Certificate Status
Select the method to verify the validity of certificates. Select [By Retrieving CRL] if the
machine retrieves a CRL (Certificate Revocation List) from the validation authority to verify
the revocation status of the certificate. If the machine uses OSCP (Online Certificate Status
Protocol), which can verify the validity revocation status of the certificate, to have the
5
certificate authority or validation authority check the revocation status.
Auto Retrieval of CRL
Select whether or not to automatically retrieve a CRL.
CRL Retrieval Time-Out
Specify a time-out value to retrieve a CRL from 5 to 60 seconds in 1 second increments.
Send Query to OCSP Responder With
Select how to access an OCSP responder from [URL as Specified in Certificate] or [URL as
Specified by Administrator].
URL of OCSP Responder
Enter the URL of an OCSP responder when [URL as Specified by Administrator] has been
selected for [Send Query to OCSR Responder With]. Up to 255 characters are allowed.
OCSP Communication Time-Out
Specify a time-out value for communication between the OCSP responder and the machine
from 5 to 60 seconds in 1 second increments.

Other Settings

You can set the following network related items:
Protocol to Receive E-mail
Select from [SMTP] and [POP3] depending on your environment.
Add Domain Name to User Name
Select whether or not to add domain names to user names.
Output Destination for E-mail
Specify an output destination for e-mail print. Selecting [Auto] enables the machine to select
the output destination, which is set as the default output destination.
184