Clear Coating - Canon pro-10s series Online Manual

Clear Coating

This dialog allows you to set the various Clear Coating functions.
Clear Coating Area
Set the clear coating area.
Auto
The printer automatically sets the areas to be clear-coated and whether clear coating is to be
executed.
It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate the
print speed.
Overall
The printer clear-coats the entire print area.
If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve the
results.
Custom
Use a form to specify the clear coating areas.
Select this option also when you are creating or deleting a form.
Form Composite Print
Select this item to combine forms and patterns that specify clear coating areas and to print the
document by adding decorative effects.
Note that you must first create a form file to execute form composite print.
Create/Delete Form File
Select this item to create or delete a form file to be used in form composite print.
Important
• On the Quality & Media, look at Media Type. If a media type other than Photo Paper Plus
Glossy II, Photo Paper Pro Platinum, Photo Paper Pro Luster, Photo Paper Plus Semi-gloss,
Other Glossy Paper (Wide Margins), or Other Glossy Paper is selected, you cannot select
Overall or Custom.
303