About Pictbridge Print Settings - Canon pro-10s series Online Manual

About PictBridge Print Settings

Settings on a PictBridge Compliant Device
This section describes the PictBridge function of the printer. For the print settings on a PictBridge
compliant device, refer to the instructions given in the device's instruction manual.
Note
• In the following description, names of setting items are given according to those used in Canon-brand
PictBridge compliant devices. Setting item names may be different depending on the brand or model
of your device.
• Some setting items explained below may not be available on some devices. When you cannot
change print settings on a device, the printer prints images as follows:
Paper size: 4" x 6"/ 10 x 15 cm
Paper type: Fast Photo
Layout: 1-up, Borderless
Date/File No. Print: Not printed
The following settings can be used when printing from a PictBridge compliant device.
Paper size 4" x 6"/ 10 x 15 cm, 5" x 7"*, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), A3, A3+/ 13" x 19"
* Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected
depending on the device.)
Paper type • Default: Photo Paper Pro Platinum PT-101
• Photo:
Photo Paper Plus Glossy II PP-201
• Semi-gloss*:
Photo Paper Plus Semi-gloss SG-201/Photo Paper Pro Luster LU-101
• Fast Photo:
Photo Paper Pro Platinum PT-101
• Plain:
A3, A4, or Letter sized plain paper
When Paper type is set to Plain, borderless printing will be disabled even when Layout is set to
Borderless.
* Available only with a Canon-brand PictBridge compliant device. (May not be available with some
Canon-brand PictBridge compliant devices.)
Layout Default (Borderless), Index, Borderless, Bordered, 20-up*1, 35-up*2
*1 With a Canon brand PictBridge compliant device, selecting items with "i" mark allows you to print
shooting info (Exif Data) in list format (20-up) or on the margins of the specified data (1-up). (May not
be available with some Canon-brand PictBridge compliant devices.)
*2 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand
PictBridge compliant device. (May not be available with some Canon-brand PictBridge compliant
devices.)
Print date & Default (Off: No printing), Date, File No., Both, Off
file no.
324