Canon pro-10s series Online Manual page 302

Use the printer driver only when adjusting the color balance slightly. To change the color balance
significantly, use the application software.
Tone
Sets the color adjustment for monochrome printing.
You can select Cool Tone, Black and White, Warm Tone or Custom.
You can also enter X and Y values while checking the color tone, click the adjustment area with the
mouse, or adjust the tone by dragging the slider.
Important
• Tone and X, Y (Monochromatic adjustment value) are displayed when Black and White Photo
Print check box is selected for Quality & Media.
Brightness
Select the brightness of printed images.
You cannot change the levels of pure white and black. You can change the contrast of the colors
between white and black.
Intensity
Select this method to adjust the overall density of your print.
To increase the overall intensity, drag the slider to the right. To decrease the overall intensity, drag the
slider to the left.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Contrast
The Contrast function changes the differences between light and dark in images during printing.
To make the differences between the light and dark portions of images greater and more distinct,
increase the contrast. On the other hand, to make the differences between the light and dark portions of
images smaller and less distinct, reduce the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Important
• When the Black and White Photo Print check box is checked for Quality & Media, the color balance
(Cyan, Magenta, Yellow) are unavailable.
• If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow), Tone,
X, Y, Brightness, Intensity, and Contrast appear grayed out and are unavailable.
Related Topics
Specifying Color Correction
Adjusting Color Balance
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
302