Adjusting Colors With The Printer Driver - Canon pro-10s series Online Manual

Adjusting Colors with the Printer Driver

To print in PRO mode, specify the color correction function of the printer driver. PRO mode accurately
applies the characteristics of data displayed on the monitor and allows you to obtain print results of
impressions that are close to those displayed on the monitor.
Important
• When you print in PRO mode, Canon recommends that you set the monitor and the environment light
as follows:
• Monitor
Color temperature: D50 (5000K)
Brightness: 120 cd/m2
Gamma: 2.2
• Environment light
Fluorescent light for D50 color evaluation (color temperature 5000K, high color rendering
properties)
Brightness when looking at printed materials: 500 lx ± 125 lx
Note
• When printing from an application software that allows you to identify and specify ICC profiles, use an
ICC profile for printing with that application software and select setting items that manage colors.
The procedure for adjusting colors with the printer driver is as follows:
1. Select Color Matching from the pop-up menu of the
2. Select color correction
Select Canon Color Matching.
3. Set the other items
From the pop-up menu, select Color Options. If necessary, adjust the color balance (Cyan, Magenta,
Yellow) and adjust Brightness, Intensity, and Contrast settings.
4. Complete the setup
Print Dialog
279