Printing Speed Is Slow - Canon pro-10s series Online Manual

Hide thumbs Also See for pro-10s series:
Table of Contents

Advertisement

Printing Speed Is Slow

The printer may be printing out a large job issued from another computer.
Check1
When using wireless LAN, make sure that the radio status is good and adjust
Check2
the installation positions while monitoring the radio status with IJ Network Tool.
Monitoring Wireless Network Status
Make sure that there is no barrier or obstacle between the wireless router and the printer. Wireless
communication between different rooms or floors is generally poor. The metal, concrete, or timber including the
metallic material, mud wall, or insulator may interrupt a wireless communication. If the printer cannot
communicate with the computer over a wireless LAN for the wall material, place the printer and the computer in
the same room or floor.
When using wireless LAN, make sure that there is no source of interference in
Check3
your vicinity.
If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby,
the device may cause interference. Place the wireless station as far away from the interference source as
possible.
349

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-100s series

Table of Contents