Switching The Paper Source To Match The Purpose - Canon pro-10s series Online Manual

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a manual feed tray and a rear tray.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1. Select Quality & Media from the pop-up menu of the
2. Select the media type
For Media Type, select the same paper type loaded in the printer.
Note
• When Other Glossy Paper (Wide Margins), Fine Art "Museum Etching", Photo Paper Pro
Premium Matte, Other Fine Art Paper 1Other Fine Art Paper 2, or Canvas is selected for
Media Type in the Print Dialog, select "XXX (Art Paper Margin 30)" for Paper Size.
3. Select the paper source
For Paper Source, select the item below that matches your purpose.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Important
• When 4 x 6, 5 x 7, A5, JIS B5, L, Postcard or Postcard Double is selected for Paper Size on
the Print Dialog, paper cannot be supplied from the manual feed tray in the back.
• When Plain Paper, Hagaki A, Ink Jet Hagaki, or Hagaki is selected from the Media Type
menu of the Quality & Media on the pop-up menu in the Print dialog, paper cannot be supplied
from the manual feed tray in the back.
Rear Tray
Paper is fed from the rear tray.
Print Dialog
266