Maintenance Procedure - Canon pro-10s series Online Manual

Hide thumbs Also See for pro-10s series:
Table of Contents

Advertisement

Maintenance Procedure

If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned
printed ruled lines), perform the maintenance procedure below.
Important
• Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink
tank.
Note
• Open the top cover and make sure that the lamp on the ink tank is lit. If the lamp is flashing or off, take
appropriate action.
Checking the Ink Status with the Ink Lamps
• If print results are uneven, the ink quality maintenance with the printer driver may improve print quality.
Maintaining the Ink Quality
• Increasing the print quality in the printer driver settings may improve the print result.
Changing the Print Quality and Correcting Image Data
When the Print Results Are Blurred or Uneven:
Print the nozzle check pattern.
Step1
From the printer
Printing the Nozzle Check Pattern
From the computer
Use Your Computer to Print a Nozzle Check Pattern
Examine the nozzle check
Step2
If there are horizontal streaks in the pattern:
Clean the print head.
Step3
From the printer
Cleaning the Print Head
From the computer
Cleaning the Print Heads from Your Computer
After cleaning the print head, print and examine the nozzle check pattern:
If the problem is not resolved after performing from step 1 to step 3 twice:
Clean the print head deeply.
Step4
From the computer
pattern.
144
Step1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-100s series

Table of Contents