Initializing the Printer Settings
You can initialize the printer settings.
• When using the printer over LAN, note that initialization erases all network settings on the printer, and
printing operation from a computer over network becomes impossible. To use the printer over network,
perform setup according to the instructions on our website.
Follow the procedure below to initialize the printer settings.
Make sure that the printer is turned on.
2. Press and hold the RESUME/CANCEL button then release the button when the POWER
lamp flashes 15 times.
All the printer settings are initialized. The administrator password specified by IJ Network Tool returns to
the default setting.
After initializing the printer, perform setup again as necessary.
• You cannot initialize the current position of the print head.