57. Tighten the two lock nuts (from step 53) to 30 ft-lb.
58. Connect the coolant feed hose and oil return hose to
the turbocharger, release the clamps, and secure the
hoses with the hose clamps.
59. With the turbocharger secured, install the oil feed
pipe with the banjo bolts and two new crush washers
on each side of the union. Tighten to 11 ft-lb.
743-780A
NOTE: Make sure when installing the oil feed pipe
that the correct banjo bolt is securing the pipe to the
engine and turbocharger (as noted in disassembling).
743-991A
744-771B
73