Arctic Cat 2015 ZR 5000 Service Manual page 35

26. Disconnect the harness plug-ins from the ignition
coils (A) and camshaft timing sensor (B).
 NOTE: With the main harness plug-ins discon-
nected, secure the harness up and out of the way
from the engine.
27. Loosen the clamps securing the throttle body assem-
bly to the intake flanges; then remove the assembly
and allow it to lie on the tunnel.
 NOTE: Steps 28-30 are for the 9000 only.
28. Disconnect the throttle position sensor, air tempera-
ture sensor, boost sensor, and cam position sensor.
29. From the opposite side of the throttle body, discon-
nect the idle speed control and the throttle cable; then
remove the spark plug caps from the spark plugs.
PC033A
30. Loosen the flange clamps securing the intake mani-
fold to the cylinder head; then remove the manifold
and throttle body assembly along with the two
flanges.
ZJ094A
Seal the intakes with tape to avoid any dirt or foreign
objects from falling into the intakes.
31. Loosen and remove the oil tank/engine breather
hose; then remove the cap screws securing the oil
return hose from the engine. Remove the oil return
hose.
743-999A
CAUTION
0743-992
TZ090A
PC034A
33