6. Remove the lock nuts and washers securing the
exhaust pipes to the cylinder head; then carefully
remove the turbocharger and exhaust pipes assembly.
If needed remove the cap screws securing the lower
heat shield to the exhaust pipes and turbocharger.
7. Remove the cap screws securing the starter motor to
the engine. Remove the starter motor.
8. On the 5000, remove the cap screws securing the two
intake flanges to the cylinder head; then remove the
flanges.
52
9. On the 9000, remove the four cap screws securing
the manifold adapter assembly; then remove the
manifold.
743-780C
10. Remove the three cap screws securing the thermostat
cap to the engine; then remove the cap and thermo-
stat.
746-517A
NOTE: If engine case cleaning or replacing is nec-
essary, remove the coolant and oil sensors from the
engine case.
ZJ028C
ZJ029A
TZ087A
ZJ030A