Arctic Cat 2015 ZR 5000 Service Manual page 43

 NOTE: Steps 29-32 are for the 9000 only.
29. Install the fascia and install the front pins (B) of the
intercooler into the brackets; then install the rear
brackets (A) to the pins of the intercooler and secure
the brackets to the chassis with cap screws and lock
nuts. Tighten securely.
30. Install and secure the turbocharger/intercooler hose
and air intake hose; then secure the intercooler hose
to the throttle body.
0741-518A
 NOTE: Remove any tape sealing the turbocharger.
Make sure there are no obstructions in the intake and
intercooler side of the turbocharger before installing the
intercooler hose.
31. Install the waste gate control valve hose to the turbo-
charger and install the clamp as noted during remov-
ing; then install the side cover and secure with the
screws.
PC056A
PC055A
32. Install the exhaust resonator to the chassis support
and secure with the spring; then secure the resonator
to the exhaust pipe and tighten the cap screws and
flange nuts to 12 ft-lb.
 NOTE: Steps 33-34 are for the 5000 only.
33. Position the exhaust pipes and resonator into the
chassis and install and secure the MAG and PTO
exhaust flanges (with new gaskets) to the cylinder
head with the flange nuts. Tighten evenly to 17 ft-lb.
CAUTION
PC054A
PC053A
PC052A
41