22. With the wire harness properly routed, install the
harness connectors to the throttle position sensor, air
temperature sensor, boost sensor, and cam position
sensor.
NOTE: At this time, secure the wire harness to the
locations noted during disassembly.
23. Secure the harness connectors to the oil pressure
switch (A) and the coolant temperature sensor (B)
and install the air pressure sensor (C) to the bracket
of the side support.
SNO-741A
NOTE: On the 9000, install the harness connectors
and vacuum hoses to the air bypass control valve (A)
and the waste gate control valve (B) to the bracket of
the PTO-side chassis support.
0743-992
743-999A
24. With the battery cables and solenoid harness prop-
erly positioned in the channel of the gas tank assem-
bly, install the gas tank (see the Fuel Systems
section).
25. Install the upper chassis components using the fol-
lowing sequence and illustration:
PC028A
PC051A
SNO-231C
39