Removing And Installing Selector Lever Cable - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
6 - 23 Nm
7 - Support bracket
❑ For selector lever cable
8 - 9 Nm
4.10 Removing and installing selector lever
cable
Special tools and workshop equipment required
♦ Removal lever -80-200-
Removing
– If applicable, activate jacking mode when raising the vehicle
⇒ Running gear, front-wheel drive and four-wheel drive; Rep.
Gr. 43 ; Adaptive air suspension .
– Shift selector lever to position "D".
– Take out insert -1- for front ashtray by pressing button
-arrow-.
– Unscrew bolt -arrow- and remove housing for front ashtray.
– Unplug electrical connector.
28
Rep. Gr.37 - Controls, housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.