6. Kick-down switch -F8-
♦ Fitting location: The kick-down switch -F8- is bolted onto the
floor under the pedals.
Note
The kick-down -F8- switch is tested via Self-diagnosis.
♦
Removing and installing kick-down switch -F8- ⇒ Fuel supply
♦
system, petrol engines; Rep. Gr. 20 .
7. Selector lever position display -Y6-
♦ Fitting location: The selector lever position display -Y6- is in‐
tegrated in the instrument cluster.
Note
If all the characters in the display light up together, this indi‐
♦
cates a simple fault.
A flashing display indicates a critical fault.
♦
A blank display indicates defective wiring or a defective se‐
♦
lector lever position display -Y6- .
If the selector lever position indicator -Y6- is defective, renew
♦
the instrument cluster ⇒ Electrical system; Rep. Gr. 90 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
multitronic 01J, front-wheel drive - Edition 11.2007
Audi A8 2003 ➤
13
1.