Audi A8 2003 Workshop Manual page 38

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
♦ Torque wrench -V.A.G 1331-
Procedure
– Shift selector lever to position "D".
• The "D" symbol must be lit up in the selector lever position
indicator in the instrument cluster.
– Take out insert -1- for front ashtray by pressing button
-arrow-.
– Unscrew bolt -arrow- and remove housing for front ashtray.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Unplug electrical connector.
– Lift off centre console switch panel -arrows-.
– Unplug electrical connectors.
• Cover on selector mechanism must remain installed for dura‐
tion of adjustment process.
• Selector lever in position "D".
34
Rep. Gr.37 - Controls, housing
with respect to the correctness of information in this document. Copyright by AUDI AG.