Audi A8 2003 Workshop Manual page 56

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– Unscrew bolts -arrows- and remove tunnel cross member.
– Remove bolts -1- and detach noise insulation bracket.
– Remove bolts -2- and detach cross member.
– Unbolt heat shields -1- for drive shafts (left and right).
– Unbolt drive shafts (left and right) from gearbox flange shafts.
– Position engine and gearbox jack -V.A.G 1383 A- with gearbox
support -T10337- underneath gearbox, as shown in illustra‐
tion, and support gearbox.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Slightly lift gearbox with engine and gearbox jack -V.A.G 1383 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
A- .
52
Rep. Gr.37 - Controls, housing