Audi A8 2003 Workshop Manual page 47

– Position engine and gearbox jack -V.A.G 1383 A- with gearbox
support -T10337- underneath gearbox, as shown in illustra‐
tion, and support gearbox.
– Slightly lift gearbox with engine and gearbox jack -V.A.G 1383
A- .
– Unplug electrical connector -1- at gearbox mounting (left-
side).
– Unscrew bolts -arrows- and remove gearbox mounting (left-
side).
– Unscrew gearbox support (left-side) -arrows-.
– Unplug electrical connector -1- at gearbox mounting (right-
side).
– Unscrew bolts -arrows- and remove gearbox mounting (right-
side).
multitronic 01J, front-wheel drive - Edition 11.2007
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
5. Removing and installing gearbox
43