Audi A8 2003 Workshop Manual page 45

– Release quick-release fasteners -1- and -2- and detach noise
insulation panels.
– Unscrew bolts -1- and remove bracket for noise insulation.
– Unscrew bolts -2- and remove cross member.
– Unbolt heat shields -1- for drive shafts (left and right).
– Unbolt drive shafts (left and right) from gearbox flanges.
– Unscrew bolts -1- and -2- on bracket for exhaust system (left-
side) and remove bracket.
multitronic 01J, front-wheel drive - Edition 11.2007
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
5. Removing and installing gearbox
41