Audi A8 2003 Workshop Manual page 98

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– Slide new twin-lip oil seal -A- onto connector of gearbox control
unit -J217- , with twin-lips facing outwards.
– Clean sealing surfaces on gearbox housing and end cover.
– If any dowel sleeves were removed from gearbox housing or
cover, these must be re-fitted in same places.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Fit a new gasket -A- for end cover.
Note
The gaskets can be made of metal or paper. The new gasket
♦
must be made of the same material as the old one ⇒ Electronic
parts catalogue .
Make sure dowel sleeves are correctly seated.
♦
94
Rep. Gr.38 - Gears, control