Audi A8 2003 Workshop Manual page 48

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– Unscrew gearbox support (right-side) -arrows-.
– Lower gearbox slightly.
– Move Lambda probe wires clear.
– Unscrew nuts -1- and -3- (accessible from below) connecting
front exhaust pipe to exhaust manifold on left side.
Note
For illustration purposes here shown with engine removed.
– Remove front exhaust pipe with catalytic converter.
– Move Lambda probe wires clear.
– Unscrew nuts -1- and -3- (accessible from below) connecting
front exhaust pipe to exhaust manifold on right side.
Note
For illustration purposes here shown with engine removed.
– Remove front exhaust pipe with catalytic converter.
– Unscrew bolts -arrows- and remove tunnel cross member.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
44
Rep. Gr.37 - Controls, housing