Audi A8 2003 Workshop Manual page 67

– Release quick-release fasteners -1- and -2- and detach noise
insulation panels.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew bolts -1- and -2- on bracket for exhaust system (right-
side) and remove bracket.
– Apply lifting column of engine and gearbox jack -V.A.G 1383
A- to gearbox from below (place a block of wood -1- between
lifting column and gearbox).
– Use engine and gearbox jack to lift gearbox up slightly.
– Unplug electrical connector -1- at gearbox mounting (right-
side).
– Unscrew bolts -arrows- and remove gearbox mounting (right-
side).
multitronic 01J, front-wheel drive - Edition 11.2007
8. Removing and installing gearbox mounting and gearbox support
Audi A8 2003 ➤
63