Audi A8 2003 Workshop Manual page 42

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– Detach air intake hose -1- from air-mass meter -G70- .
– Remove bolts -arrows- from solenoid valve mounting plate
-3-.
– Pull hose -4- off air duct -2-.
– Unscrew bolt -arrow- and detach air duct -2- from throttle valve
module -J338- .
– If fitted, detach hose -1- from air duct.
Note
For illustration purposes, the air duct is shown from rear, with en‐
gine removed.
– Detach vacuum hose -arrow- to brake servo at bulkhead.
– Remove electrical connectors -1- and -2- from retainer and
unplug.
– Guide electrical wires to Lambda probes downwards.
38
Rep. Gr.37 - Controls, housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.