Audi A8 2003 Workshop Manual page 46

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– Unscrew bolts -1- and -2- on bracket for exhaust system (right-
side) and remove bracket.
– Remove front cross member -arrows-.
– Loosen clamps -1- and -2-.
Note
To stabilise exhaust system, the clamps must first remain in their
installation position; the front exhaust pipes remain inserted in
clamps.
Note
The flexible pipe connection (de-coupling element) on the front
exhaust pipe must not be bent more than 10° - otherwise it can
be damaged.
– Unscrew nuts -arrows- on brackets for front exhaust pipes (left
and right).
– Remove bracket for exhaust system from gearbox.
42
Rep. Gr.37 - Controls, housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.