Audi A8 2003 Workshop Manual page 96

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
– ... and tie up front left and front right exhaust pipes onto body
-arrows-.
– Unscrew bolts -arrows- and remove tunnel cross member.
– Position engine and gearbox jack -V.A.G 1383 A- with gearbox
support -T10337- underneath gearbox, as shown in illustra‐
tion, and support gearbox.
– Use engine and gearbox jack to lift gearbox up slightly.
– First remove bolts -2- and -3- and then subframe securing
bolts -1- and -4-.
– Using engine and gearbox jack -V.A.G 1383 A- , lower gearbox
far enough to be able to access selector lever cable at selector
shaft lever at top of gearbox.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
92
Rep. Gr.38 - Gears, control