Audi A8 2003 Workshop Manual page 43

– Unscrew bracket for electrical connectors (left-side) from bulk‐
head and remove electrical connectors from bracket.
– Unplug electrical connectors -2-, -3- and -4- and move elec‐
trical wiring clear.
– Guide electrical wires to Lambda probes downwards.
– Unscrew nut -2- (access from above), connecting left front ex‐
haust pipe with exhaust manifold.
Note
For illustration purposes here shown from rear, with engine re‐
moved.
– Unscrew nut -2- (access from above), connecting right front
exhaust pipe with exhaust manifold.
Note
For illustration purposes here shown from rear, with engine re‐
moved.
– Remove bolts -5- and -6- (access from above) from engine/
gearbox flange.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
multitronic 01J, front-wheel drive - Edition 11.2007
Audi A8 2003 ➤
5. Removing and installing gearbox
39