Table of Contents
Advertisement
Setting a roll media
Prepare for the take-up device first
Prepare for the take-up device before setting the roll media.
• Handle the roll shaft with care, since it is very
heavy with media. To avoid an accident or injury,
be sure to grip the handles on both ends.
1
Fix the tension-bars on the front and the back of this machine at the lock position.
• The locks are on the right front and the left back of this machine.
• Lift the tension-bars and fix them with the locks.
Lock
• Grip the outside of the lock of the tension-bar.
2
Remove the roll shaft on the take-up device at the front of this machine.
(1) Loosen the cover fixing screw attached to the cover of right/ left of take-up device and unlock the
AMF lock by sliding it.
(4) Open the covers.
(5) Remove the roll shaft.
If gripping the other parts, your hand may get stuck in.
Handle
Tension-bar
Roll shaft
Cover fixing
screw
AMF lock
Setting a Media
2-11
1
2
4
5
6
Advertisement
Table of Contents
