Table of Contents
Advertisement
Warning / Error Messages
If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.
Warning messages
Errors when performing operations
Message
C A N ' T O P E R A T E
CO V E R O P E N
C A N ' T O P E R A T E
ME D I A U N D E T E C T E D
C A N ' T O P E R A T E
MO T OR P OWE R O F F
C A N ' T O P E R A T E
I N K E R ROR
C A N ' T O P E R A T E
D A T A R EMA I N
Message displayed in LOCAL
Message
< L OC A L >
C a n' t P R I N T / C A R T . [ E N T ]
< L OC A L >
Wa s t e
i n k
f u l l
< L OC A L >
Wa s t e
i n k n e a r
< L OC A L >
Wa s t e
i n k
t a n k n o n e
< L OC A L >
R e p l a c e a W I P E R [ MN T ]
< L OC A L >
* * NO ME D I A * *
< L OC A L >
D A T A R EMA I N
Cause
The front cover or the maintenance
cover is opened.
The media has not been detected.
The motor is OFF after the cover was
opened etc.
An ink error occurred.
Data was received.
Cause
Ink errors (unusable ink) occur in mul-
tiple ink bottles.
Ink supply (print, cleaning, etc.) can-
not be performed.
The waste ink tank is full.
The waste ink tank is nearly full.
f u l l
The waste ink tank is not set.
Time to replace the wiper in the cap-
ping station with a new one has
come.
(The wiping count has reached the
specified value.)
The media is not set.
The sensor has been broken.
The data has been received.
Solution
• Check the front cover and maintenance
covers.
• If the same error message appears again
even after closing all the covers, contact
your local distributor to call for service.
• Perform media detection.
• Close the front cover and maintenance cov-
ers (right and left).
• Check the ink bottle for the supply path cor-
responding to the indicated color.
• Perform data clear. (
P.2-41)
Solution
• Press the
key to check the ink
bottle generating the warning.
Replace them with usable ink bottles.
• Check the waste ink tank.
• Set the waste ink tank.
• Press the
MAINT.
key and replace the
wiper with a new one. (
• Set the media. (
P.2-11) If the same
error message appears again, contact your
local distributor to call for service.
• Press the
key to perform print-
ing. Or, perform data clear.
1
1
1
1
P.4-29)
5
5-13
Advertisement
Table of Contents
