Table of Contents
Advertisement
Heater
This machine has a built-in right-heater/ center-heater/ left-heater. Use them depending on the width of the
media to be used.
• Do not replace the media or clean the platen etc. with the heater in the state of high temperature after
heating it. It may cause burning yourself.
• When you replace the media with a thinner one, perform the work after the heater temperature
decreases enough. If you perform it with the heater in the state of high temperature, media may block
the outlet of drying fan, and the heater may become too hot.
• Do not heat media with the heater for a long time when you do not print. The media may be
converted, or, the heater may become too hot.
• Do not pour ink or water on the heater. It causes troubles.If the heater gets ink or water on it, contact
a distributor in your district or our office to call for service.
Left-heater
Center-heater
Names of Parts and Functions
Right heater
1
3
4
5
6
1-7
Advertisement
Table of Contents
