Setting media
This machine can be used with roll media and leaf media.
For the media to be used, refer to P.1-13 "Usable media size".
Setting roll media
Set roll media to the roll holder on the back of this machine.
• To prevent the rigid media being jammed into the Y bar, raise the head in advance.
(
Fix the left roll holder on the back of the
1
machine.
Set the roll media core to the left roll
2
holder.
Set the roll media core to the right roll
3
holder.
Raise the clamp lever on the back of
4
this machine.
2-10
Downloaded From ManualsPrinter.com Manuals
P.2-24)
( 1 ) Loosen the roll holder fixing screw.
( 2 ) Move the roll holder to the media setting position.
( 3 ) Tighten the roll holder fixing screw.
• Push to the roll holder until the core stops.
( 1 ) Loosen the roll holder fixing screw.
( 2 ) Move the roll holder to the media setting position.
( 3 ) Insert the roll holder into the core.
( 4 ) Tighten the roll holder fixing screw.
Roll holder
Roll holder
fixing screw
Roll holder
fixing screw
Roll holder