Operation Panel - MIMAKI TX500-1800DS Operation Manual

Operation Panel

Use the operation panel to make settings for printing or operate this machine.
CONSTANT lamp
Lights in green when the heater temperature reaches the set
temperature.
HEAT lamp
Lights in orange during heating up of the heater.
ACTIVE lamp
Blinks in receiving or drawing data.
Display
Displays the status of the machine,
set items and errors.
key
Use this key to display function setting menu.
key
Cancels the last input value or returns the setting
menu to the immediate higher level of the hierarchy.
*1:The power switch under the operation panel lights in green when the power is turned on, and blinks when
the power switch is turned off. The ink clogging prevention function is periodically operated even when the
1-6
key
Use this when setting media reset and the head
gap.
Draws test patterns to check if there are any
drawing failures such as ink clogging.
Or executes Head cleaning at ink clogging.
key
Use this key to set the temperatures of the Pre-
heater, Print heater and Post-heater or check the
current temperature of the platen.
key
Performs the adjusting function such as
"Drop.POScorrect" and "Feed COMP."
key
MAINT.
Performs the maintenance function such as
station maintenance.
key
Deletes the data that have been received.
Power switch
Turns on/off the power to the machine.
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them
to select an item of printing conditions.
key
Use this key to switch between [REMOTE] and [LOCAL].
key
Registers the last input value as the setting value or goes
to the immediate lower level of the hierarchy.
key
*1