Table of Contents
Advertisement
Washing the Ink Discharge Passage (DISWAY WASH)
Wash the ink discharge passage regularly to prevent the head nozzles from clogging due to ink coagulation
inside the passage.
1
Press the
2
Press
3
Press the
• The carriage moves onto the platen.
• Dry suction operation is performed repeatedly until the washing
work is completed.
4
Open the right maintenance cover.
(1) Rotate the screws under the right maintenance
cover (for three positions) to the left and
remove them.
(2) Hold the bottom of the right maintenance cover
and pull it to the front.
(3) While pulling the right maintenance cover
downward, remove it.
• If the right maintenance cover is hard to remove,
use the supplied screwdriver.
5
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• Fill the cap with the cleaning solution just before the
solution overflows from the cap.
6
Close the right maintenance cover and press the
key.
• After the idle absorbing operation has been performed for 30
seconds, the screen returns to step2.
4-14
key in LOCAL.
MAINT.
to select [DISWAY WASH].
key.
CARR I AGE OU T
D I SWA Y WASH
D I SWA Y WASH
COMP L E T ED ( NEX T ) [ EN T ]
Right maintenance
cover
Rotate it left.
Screw
D I SWAY WA SH
P L E A SE WA I T
[ EN T ]
[ EN T ]
Advertisement
Table of Contents
