Table of Contents
Advertisement
Warning for Use
• Do not use the machine in a poorly ventilated room or a closed room.
• Take care not to damage, break or work upon the power cable. If a heavy material is placed on the power
cable, or if it is heated or pulled, the power cable can break, thus resulting in fire or electric shocks.
• Avoid locating the machine in a damp environment. Do not splash water onto the machine. Use in such an
environment can give rise to fire, electric shocks or breakdown of the machine.
• Use it with the displayed power supply specifications. The power-supply voltage of this machine shall be
single-phase 200 to 240 Vac 20 A and less. (You cannot use this machine in the 100V system.)
• Use of the machine under an abnormal condition where it produces smoke or strange smell can result in fire or
electric shocks. If such an abnormality is found, be sure to turn off the power button immediately and unplug
the cable from the wall outlet. Check first that the machine no longer produces smoke, and then contact your
distributor or a sales office of MIMAKI for repair. Never repair your machine and ink bottle by yourself since it is
very dangerous for you to do so.
• Never disassemble or remodel the main unit of the machine or the ink bottle. Disassembly or remodeling can
result in an electric shock or breakdown of the machine.
• Take care that no dust or dirt sticks to platen heaters. Dust and dirt sticking heaters can cause fire.
Hazardous Moving Parts
Keep Fingers and Other Body Parts Away
Precautions in Use
Power supply
• Leave the breaker turned ON.
• Do not turn off the main power switch on the
right side of this machine.
Heater
• Do not spill liquid on the heater as this may
cause failure or firing.
• Do not touch heater with bare hand while it is
hot; otherwise, you can get burned.
Note on maintenance
• When cleaning the External ink supply unit or
the heads, make sure to wear the attached
gloves.
About usage environment
• Do not use the machine in a place with high temperature (more than 30 °C (86°F)). If you use it in such a
place, nozzle clogging may occur, and it cannot be recovered even if you perform head cleaning etc.
• Do not use the machine in a place with low temperature/ low humidity (less than 20°C (68°F)/35 % (Rh)).
Static may be generated, and it may affect the printing quality.
WARNING
CAUTION
Handling of the power cable
• Use a power cable attached to this unit.
• Take care not to damage, break or work on the
power cable. If a heavy matter is placed on the
power cable, heated or drawn, the power cable
can break to cause fire or electric shocks.
• Connect to a socket-outlet with determinate
polarity.
Handling of ink
• If you get ink in your eyes, immediately wash
your eyes with a lot of clean water for at least 15
minutes. In doing so, also wash eyes to rinse ink
away completely. Then, consult a doctor as
soon as possible.
• If anyone drinks ink by mistake, keep him or her
quiet and see a doctor immediately. Do not allow
him or her to swallow the vomit. After that,
contact the Poison Control Center.
• If you inhale a lot of vapor and feel bad,
immediately move to a location of fresh air and
then keep yourself warm and quiet. Then,
consult a doctor as soon as possible.
Safety Precautions
viii
1
2
3
4
5
6
Advertisement
Table of Contents
