Setting A Media; Maximum Print Area - MIMAKI TX500-1800DS Operation Manual

Setting a Media

This machine can be used with a roll media and leaf media.
For usable medias, refer to P.1-17 "Usable sizes of media".

Maximum Print Area

The white area shown in the following figure represents the maximum print area.
The area other than that is the dead space that cannot be printed.
• The margin at the front and rear edges of the fabric can be reduced using a guiding fabric.
• The right and left margin may be changed as required. (
For usable media, refer to P.1-17 "Usable sizes of media".
15mm 15mm
1600mm
1600mm
P.3-6)
1
2
4
5
6
2-5