Table of Contents
Advertisement
5
Remove blot on the pinch roller surface.
• Wipe the pinch roller surface with a cloth etc. to remove ink blot.
6
Attach the pinch roller.
• When attaching the pinch roller, align it with the protrusion of attaching side.
7
Turn on the power supply of this machine to check whether the operation is normal.
(1) Press the
(2) Press
(3) Press the
• The carriage moves onto the platen.
(4) Open the front cover.
(5) Move the carriage manually to the left edge and check that the carriage does not contact with
the pinch roller.
• If the carriage contacts with the pinch roller, attach the pinch roller again and then check that it does
not contact with the carriage.
(6) After you check that there is no problem, close the front cover.
(7) Press the
• After its initial operation, the machine returns to the media selection. (
key in LOCAL.
to select [Carriage Out].
key.
key.
Maintenance
Remove ink
stain.
P.2-19)
4-7
1
1
1
4
Advertisement
Table of Contents
