Table of Contents
Advertisement
Message
! L E F T H E A T E R B R K
! C E N T E R H E A T E R B R K
! R I GH T H E A T E R B R K
Ink Error
Ink error is displayed also in the local guidance. (
Message
NON
I N K
I C
: - - - -
Y Y K K
WRONG I N K
I C
: - - - -
Y Y K K
K I N D O F
I N K
: - - - -
Y Y K K
CO L OR O F
I N K
: - - - -
Y Y K K
WRONG I N K B O T T L E
: - - - -
Y Y K K
NO I N K B O T T L E
: - - - -
Y Y K K
I N K E N D
: - - - -
Y Y K K
I N K N E A R E N D
: - - - -
Y Y K K
C H C K
I N K B O T T L E
: - - - -
Y Y K K
E X P I R A T I ON
: - - - -
Y Y K K
E X P I R A T I ON ( 1 MON T H )
: - - - -
Y Y K K
E X P I R A T I ON ( 2 MON T H )
: - - - -
Y Y K K
5-16
Cause
A drying heater is disconnected.
P.3-45)
Cause
The IC chip of the ink bottle cannot be
read normally.
The ink of the ink bottle is different in
type from the ink currently supplied.
The ink of the ink bottle is different in
color from the ink currently supplied.
An error occurred in the IC chip infor-
mation of the ink bottle.
The ink bottle is not set on the exter-
nal ink supply unit.
The ink of the ink bottle has been
completely used up.
The ink of the ink bottle has been
nearly used up.
Even when there are enough ink, ink
end has been detected.
The specified expiration date of an ink
bottle has passed.
The expiration date of an ink bottle
has passed (one month has passed
after the specified expiration date).
The expiration date of an ink bottle
has passed (two months have passed
after the specified expiration date).
Solution
• Turn off the main power to the machine and
turn it on after a while.
If the same error message appears again,
contact your local distributor to call for ser-
vice.
Solution
• Remove the IC chip generating the warning
once and install it again.
• If the same warning message still appears,
contact your local distributor to call for ser-
vice.
• Check the ink type of the ink bottle generat-
ing the warning.
• Check the IC chip.
• Check the ink color of the ink bottle gener-
ating the warning.
• Check the IC chip.
• Check the ink bottle generating the warn-
ing.
• Set the ink bottle on the bottle holder with
the warning.
• Replace the ink bottle generating the warn-
ing with a new one.
• Replace the ink bottle generating the warn-
ing with a new one.
• Check the ink bottle setting status.
The expiration date has passed.
However, you can use it until the end of the
following month.
• One month has passed after the expiration
date.
However, you can use it until the end of this
month. (The ink bottle lamp blinks in red.)
Two months have passed after the expiration
date.
Replace the ink bottle generating the warn-
ing with a new one.
Advertisement
Table of Contents
