Printing Data; Starting A Printing Operation - MIMAKI TX500-1800DS Operation Manual

Printing Data

Starting a Printing Operation

• When using a roll media, rewind the media by hand before printing so that it is not loose.When the roll
media has not been rewound tightly, it may cause the image quality to deteriorate.
• Do not use the machine in a place with high temperature (more than 30 °C (86°F)). If you use it in
such a place, nozzle clogging may occur, and it cannot be recovered even if you perform head
cleaning etc.
• Do not use the machine in a place with low temperature/ low humidity (less than 20°C (68°F)/35 %
(Rh)). Static may be generated, and it may affect the printing quality.
1
Setting a Media (
2
Checking the Heater Temperature
• Check the CONSTANT lamp lights in [LEFT], [CENT], and
[RIGHT] below the display.
3
Press the
• If the heater temperature has not reached the setting value, the
right screen is displayed.
Even if it has not reached, you can move to REMOTE when
pressing the
• The screen changes to REMOTE, and data can be received from
the PC.
4
Transmit data to be printed from the PC.
• The printing conditions are displayed.
• For the method of data transmission, see the instruction
manual for the output software.
5
Start printing.
2-40
P.2-5)
key in LOCAL.
key.
T EMP ERA T URE CON T RO L !
P L E A SE WA I T
Resolution : 600 /900 DPI
With/ without nozzle recovery setting
(
Operates with nozzle recovery enabled
)
when "R" is displayed
With/ without MAPS setting
Heads used for
printing
6 0 0 x 9 0 0 R / MP / A L L
6 . B d . N d . x 2 x x . x x m
The length of
media drawn
Scanning speed
x1 : Standard
speed
x2 : Double
speed
Data type
VD : Variable data
ND : Normal data
Scan direction
Ud : Unidirectional
Bd : Bidirectional
Number of passes