Ink Bottle Warning Appears - MIMAKI TX500-1800DS Operation Manual

Ink bottle warning appears

If an ink bottle trouble is detected, the bottle LED "red" is lit, and a warning message appears.
None of printing, cleaning and all the other operations that use ink is available.
If an abnormality occurs, perform the following procedures:
• Check that the IC chip in the ink cover is correctly set.
• Replace the ink bottle in question immediately.
• Once ink bottle trouble is displayed, do not leave the ink bottle without replacing it for a long time;
otherwise, the machine will lose the nozzle clogging prevention function.
If nozzles are clogged, the machine must be repaired by MIMAKI's service engineer.
Displaying the description of ink bottle trouble
The contents of ink bottle error are confirmable by the following operations.
1
Press the
2
Press the
• When multiple bottle defects occur and if you press the
by turns.
key in LOCAL.
key.
Troubleshooting
S b 3 0 0 1 2 3 4 5 6 7 8
REMA I N 3 4 5 6 7 8 9 9
NON I NK I C
1 2 3 4 5 6 7 8
key or , they are displayed
1
1
1
1
5
5-5