Media Get Jammed / Media Is Soiled; [Heat] Or [Constant] Led Does Not Light Up - MIMAKI TX500-1800DS Operation Manual

Media get jammed / media is soiled

Media jamming or stained media is considered to be due to the use of an unsuitable media or improper setting
of media.
Is a recommended media used ?
Is the media not curled or bent ends ?
Yes
Is the media hanging down along the
platen ?

[HEAT] or [CONSTANT] LED does not light up

Check the basic operation.
Is the power to the machine ON ?
Yes
Is the heater temperature setting effective ?
No
Use recommended media.
No
Avoid using any media with curls or bent ends.
No
Use a take-up device (
re-load the media on the machine. (
No
Turn on the power to the machine. (
No
Set the heater temperature. (
Troubleshooting
P.2-17 step 19) or
P.2-5)
P.2-3)
P.2-28)
5-3
1
1
1
1
5