Outline Of Media Setting - MIMAKI TX500-1800DS Operation Manual

Outline of media setting

Roll media
Checking spacer (
Setting take-up unit
( P.2-11)
Adjusting the fabric retainer
( P.2-20)
Setting a roll media
( P.2-14)
Adjusting the Head Height
( P.2-26)
Changing the print origin
( P.2-27)
2-6
P.2-7) Use the spacer depending on the printing method.
Set the take-up unit referring to
P.2-11 "Prepare for the take-up
device first".
Refer to P.2-20 "How to adjust fabric retainer".
Refer to P.2-14 "Setting a Roll
Media".
Setting a leaf media
( P.2-24)
Refer to P.2-26 "Setting the Head Gap".
Refer to P.2-27 "Changing the printing origin".
Leaf media (with a spacer)
Normal print : Remove the spacer and set a sponge.
Over print : Remove the sponge and set a ink receiver
spacer.
Refer to P.2-24"Setting leaf
media".