Polycom DMA 7000 Operation Manual page 74

DMA Operations Guide
66
In the MCUs list, select the MCU of interest.
2
In the Actions list, select Stop Using.
3
When asked to confirm that you want to stop using the MCU, click Yes.
4
The Polycom DMA system immediately terminates all H.323 calls and
conferences that it placed on that MCU (for SIP calls only, it migrates the
calls to in-service MCUs with available capacity.
This has no effect on the MCU itself, which continues to accept any calls to
it from other sources.
To stop using an MCU, but allow existing calls and conferences to continue
Go to Configuration > MCU > MCUs.
1
In the MCUs list, select the MCU of interest.
2
In the Actions list, select Busy Out.
3
When asked to confirm that you want to busy out the MCU, click Yes.
4
The Polycom DMA system stops creating new conferences on that MCU,
but it allows its existing conferences to continue and accepts new calls to
those conferences.
This has no effect on the MCU itself, which continues to accept any calls to
it from other sources.
To start using an MCU again
Go to Configuration > MCU > MCUs.
1
In the MCUs list, select the out-of-service MCU of interest.
2
In the Actions list, select Start Using.
3
See also:
"MCUs" on page 59
"Add MCU Dialog Box"
"Edit MCU Dialog Box"
on page 62
on page 63
MCUs
Polycom, Inc.