Mcu Pools - Polycom DMA 7000 Operation Manual

MCU Pools

MCU Pools
Polycom, Inc.
The MCU Pools list shows the MCU pools, or logical groupings of media
servers, that are defined in the Polycom DMA system. A pool may group
MCUs based on location, capability, or some other factor.
Note
MCU pools were called MCU zones in earlier versions of the Polycom DMA system.
The name was changed to avoid confusion with the concept of gatekeeper zones.
Enterprise groups can be associated with an MCU pool order, which specifies
the order of preference in which MCU pools are used. This lets you, for
instance, ensure that all users in a specific domain are preferentially routed to
conferencing resources in their geographic location.
The following table describes the fields in the list.
Table 5-5 Information in the MCU Pools list
Column
Name
Description
MCUs
The Actions list associated with the MCU Pools list contains the items in the
following table.
Table 5-6 MCU Pools commands
Command
Add
Edit
Delete
See also:
"Add MCU Pool Dialog Box"
"Edit MCU Pool Dialog Box"
"MCU Pool Procedures"
Description
Name of the MCU pool.
Description of the pool, such as the geographic location
of the MCUs it contains.
The MCUs that are in the pool.
Description
Opens the Add MCU Pool dialog box, where you can
define a new pool.
Opens the Edit MCU Pool dialog box for the selected
pool, where you can change its name, description, and
the MCUs it includes.
Removes the selected MCU pool from the list of pools
that are available. A dialog box informs you of the effect
on pool orders and asks you to confirm.
on page 68
on page 68
on page 69
Device Management
67