Mcu Pool Procedures - Polycom DMA 7000 Operation Manual

MCU Pools

MCU Pool Procedures

Polycom, Inc.
To view the MCU Pools list
>> Go to Configuration > MCU > MCU Pools.
The MCU Pools list appears.
To add an MCU Pool
Go to Configuration > MCU > MCU Pools.
1
In the Actions list, click Add.
2
In the Add MCU Pool dialog box, complete the editable fields. All are
3
required. See "Add MCU Pool Dialog Box"
Click OK.
4
The new MCU pool appears in the MCU Pools list. The MCUs included in
the pool are displayed.
To edit an MCU Pool
Go to Configuration > MCU > MCU Pools.
1
In the MCU Pools list, select the MCU of interest, and in the Actions list,
2
click Edit.
In the Edit MCU Pool dialog box, edit the fields as required. See
3
MCU Pool Dialog Box"
Click OK.
4
The changes you made appear in the MCUs list.
To delete an MCU Pool
Go to Configuration > MCU > MCU Pools.
1
In the MCU Pools list, select the MCU pool you want to remove.
2
In the Actions list, select Delete.
3
When asked to confirm that you want to delete the selected MCU pool,
4
click Yes.
See also:
"MCU Pools" on page 67
"Add MCU Pool Dialog Box"
"Edit MCU Pool Dialog Box"
on page 68.
on page 68.
on page 68
on page 68
Device Management
"Edit
69